Customized High temperature Discontinuous Industrial Firing Shuttle
Furnace Kiln
1﹑Applicable material
The Shuttle Kiln is a batch-type firing kiln that fires products on
a kiln car that is shut inside the kiln. Control of the kiln
temperature and atmosphere is automated, and the optimal firing
conditions can be set.
The car is moveable in Shuttle Kiln, while the kiln hood is
immovable, with the door sliding upwards or sideways. The benefit
is that the loading height can be designed as high as needed. The
temperature range of the Shuttle Kiln is 700℃ to 1600℃.The kiln
pressure can be precisely maintained. For batch production, a
shuttle kiln is employed. To load and unload the kiln, two cars
with a transfer car are necessary, as well as to operate the kiln
continuously. Shuttle Kiln is simple to operate, The kiln is fully
automated thanks to PLC, making it convenient for consumers to use.
2﹑Technical specification
| Item | Specification |
| Volume | 0.3～30 m³ |
| Max operating temperature | 200～1700 ℃ |
| Energy | Electric heating, gas or oil |
| Burner | High-speed isothermal (tempering) burner |
| Number of burners | Determined by kiln volume |
| Temperature control method | Automatic or manual temperature control, optional remote control |
| Lining material | Lightweight fiber material or refractory brick masonry |
Structure type | Arch coupons or suspended ceilings, swirling flames, smoke exhaust
under the car or on the rear wall. |
| Applicable material | All kinds of ceramics, refractory materials, grinding wheels,
powder or granular materials, etc. |
3﹑Advantage
1. Intermittent production, suitable for multi-variety and
small-batch production.
2.The light-weight thin-walled kiln wall structure is adopted, and
the inner lining is made of high-temperature light-weight
materials.
3. Loading and unloading is carried out outside the kiln.
4. High-speed isothermal burners are adopted, arranged at different
heights, and high-speed airflow is ejected to make the airflow in
the kiln rotate strongly, and the convective heat transfer effect
is greatly improved. The temperature difference of each point in
the kiln can be controlled within 5 ℃ during the high-temperature
stage. In the low temperature stage, the temperature-adjusting air
is used to increase the amount of flue gas, and the temperature of
the flue gas sprayed into the kiln is adjusted, and the temperature
difference in the kiln is between 5 °C and 10 °C. The heating and
cooling speed is fast,and the firing cycle is short.
5. Appropriate inspection and control instruments can be
configured, and PLC control is adopted to realize fully automatic
operation.
4﹑Patent
With proven engineering knowledge and more than 20 years'
experience we can provide you the right furnace solution.
5﹑Customer Case in China
The first Mobile phone fast charging graphene heat dissipation film
carbonization production line
The first ITO target powder roller furnace continuous production
line in china
6﹑Foreign Customer
7﹑Package and shipment
We will well pack the goods based on the kinds of furnace and
customer's requirement.
